Archery Sight Tape

Preset Values Color Colors for the lines Large (10y/m), Medium (5y/m), Small (1y/m)

Units Inches Milimeters

Layout Ticks on Right Ticks on Left

Printing Error Correction

Distance Promised Enter the distance any point should be after printing. Actual Distance Enter the measured distance of the same point.

3-point estimation (Beta)

Point 1 Distance Point 1 Offset Typically leave at 0. Point 2 Distance Point 2 Offset Measure from Point 1 to Point 2 with a caliper. Point 3 Distance Point 3 Offset Measure from Point 1 to Point 3 with a caliper.

Advanced Settings

Sight Tape Height Sight Tape Width Start Height Start height is the distance above the first marker. This is used to make sure the text is not cut off. Pixels Per Inch This will impact all of the other presets. A larger number will improve the accuracy of the svg, but this should not be noticable at 600ppi. Line Width Percent of the sight tape as width for the lines Large,Medium,Small. This should be three numbers separated by commas. Line Weight Thickness of the lines. This can be adjusted to get the best results with your printer. Font Size Font Y Offset

Print Settings

Note: the browser will add a margin automatically that cannot be removed. The x and y positions are added to this default margin. Make sure to set margins to none in your print settings.Sight Tape X Position Sight Tape Y Position

Now What?

You can now print out the image. I prefer printing to address labels. (Avery 8160 or 18660 have both worked well.)
After putting on your sight, covering with a piece of packaging tape and trimming with a sharp knife has worked well.
You can find more instructions and additional information here.